Posters, Prints, Lithos

Lithography is a method for printing on a smooth surface. more...

Home
Contemporary (1968-Now)
Vintage (Pre-1968)
Animation Art, Cels
Apparel, Accessories
Books
Cards
Comics
Figurines
Holiday
Housewares
Jewelry
Other Vintage Disneyana
Paper
Pins, Buttons
Plush Toys
Posters, Prints, Lithos
$1 - $15
$15 - $30
$30 - $50
$50 - $75
$75 - $100
$100 - $200
$200 - $500
Premiums
Records
Theme Park Souvenirs
Toys, Games, Puzzles
Watches, Timepieces

Invented by Bavarian author Alois Senefelder in 1796, it can be used to print text or artwork onto paper or another suitable material. It can also refer to photolithography, a microfabrication technique used to make integrated circuits and microelectromechanical systems.

Printing

The principle

Lithography is a printing process that uses chemical processes to create an image. For instance, the positive part of an image would be a hydrophobic chemical, while the negative image would be water. Thus, when the plate is introduced to a compatible ink and water mixture, the ink will adhere to the positive image and the water will clean the negative image. This allows for a relatively flat print plate which allows for much longer runs than the older physical methods of imaging (e.g., embossing or engraving).

The early process

Lithography was invented by Alois Senefelder - Czech - in Bohemia in 1796. In the early days of lithography, a smooth piece of limestone was used (hence the name "lithography"—"lithos" (λιθος) is the ancient Greek word for stone). After the oil-based image was put on the surface, acid burned the image onto the surface; gum arabic, a water soluble solution, was then applied, sticking only to the non-oily surface and sealing it. During printing, water adhered to the gum arabic surfaces and avoided the oily parts, while the oily ink used for printing did the opposite.

The chemical process

Lithography works because of the repulsion of oil and water. The image is drawn on the surface of the print plate with an oil-based medium (hydrophobic). The range of oil-based mediums is endless, but the dexterity of the image relies on the lipid content of the material being used--its ability to withstand water and acid. Following the placement of the image is the application of an acid emulsified with gum arabic. The function of this emulsion is to create a salt layer directly around the image area. The salt layer seeps into the pores of the stone, completely enveloping the original image. This process is called etching. Using lithographic turpentine, the printer then removes the greasy drawing material, leaving only the salt layer; it is this salt layer which holds the skeleton of the image's original form. When printing, the stone or plate is kept wet with water. Naturally the water is attracted to the layer of salt created by the acid wash. Ink that bears a high lipid content is then rolled over the surface. The water repels the grease in the ink and the only place for it to go is the cavity left by the original drawing material. When the cavity is sufficiently full, the stone and paper are run through a press which applies even pressure over the surface, transferring the ink to the paper and off the stone.

Read more at Wikipedia.org